|
IEI Launches the New IMBA-BDE High-speed ATX Motherboard
 Features |
| |
|
| High-speed 10GbE Add-on Card Support |
Integrated 10GbE LAN Interface
10GbE LAN card meets customer demond for high-speed internet |
|
 |
|
  |
Intel® Xeon processor D-1500 product family |
|
Dual-channel 2133 MHz DDR4 up to 128 GB (ECC SO-DIMM, UDIMM, RDIMM) |
|
10 GbE LAN supported |
|
Support PCI Express generation 3.0 at 8GT/s I/O bandwidth |
|
High speed interface for USB 3.0 and SATA 6Gb/s |
|
IEI One Key Recovery solution allows you to create rapid OS backup and recovery |
|
 |
 |
| Specifications |
| |
|
| Model |
IMBA-BDE |
| SoC |
Intel® Xeon® processor D-1500 product family
Intel® Xeon® processor D-1548 (up to 8-core, 12M cache, TDP=45W)
Intel® Xeon® processor D-1518 (up to 4-core, 6M cache, TDP=35W) |
| BIOS |
AMI BIOS |
| Memory |
Four 288-pin 2133 MHz dual-channel DDR4 SDRAM unbuffered DIMMs support up to 128 GB |
| Display Output |
1 x VGA (up to 1920x1200@60 Hz) |
| Ethernet |
LAN1&2: Intel® I210-AT PCIe controller
LAN3&4: Inphi CS4227 PHY (optional) |
| External I/O Interface |
| 1 x KB/MS |
2 x USB 2.0 |
| 1 x RS-232 |
4 x USB 3.0 |
|
| Internal I/O Interface |
| 1 x KB/MS (1x6 pin) |
1 x RS-232/RS-422/485 (2x5 pin, P=2.54) |
| 1 x USB 2.0 (180° Type-A) |
4 x RS-232 (2x5 pin, P=2.54) |
| 4 x USB 2.0 (2x4 pin, P=2.54) |
6 x SATA 6Gb/s (RAID 0/1/5/10 supported) |
|
| Front Panel |
1 x Front panel (2x7 pin, power LED, HDD LED, speaker, power button, reset button) |
| LAN LED |
2 x LAN LED (1x2 pin) |
| SMBus |
1 x SMBus (1x4 pin) |
| I²C |
1 x I²C (1x4 pin) |
| TPM |
1 x TPM (2x10 pin) |
| Digital I/O |
8-bit digital I/O (2x5 pin) |
| Expansion |
1 x 10GbE LAN card slot
1 x M.2 connector (M key, 2242~2280, SATA & PCIe x2 signal)
1 x PCIe x4 Gen 2
5 x PCIe x4 Gen 3 |
| Watchdog Timer |
Software programmable supports 1~255 sec. system reset |
| Fan Connector |
1 x CPU smart fan (1x4 pin)
1 x System smart fan (1x4 pin) |
| Power Supply |
ATX power supply, ATX/AT mode support |
| Power Consumption |
3.3V@0.11A, 5V@2.83A, 12V@3.97A
(Intel® Xeon D-1548 2.0GHz CPU with 32GB (four 4 GB) 2133MHz DDR4 memory) |
| Operating Temperature |
-10°C ~ 70°C |
| Storage Temperature |
0°C ~ 60°C |
| Operating Humidity |
5% ~ 95%, non-condensing |
| Dimensions |
244mm x 305mm |
| Weight |
GW: 1200g / NW: 700g |
|
|
| Ordering Information |
| |
|
| Part No. |
Description |
| IMBA-BDE-D1548-R10 |
ATX motherboard supports 14nm Intel® Xeon® D-1548, DDR4, VGA, dual Intel® GbE, dual 10GbE, four USB 3.0, six SATA 6Gb/s, HD Audio and RoHS |
| IMBA-BDE-D1518-R10 |
ATX motherboard supports 14nm Intel® Xeon® D-1518, DDR4, VGA, dual Intel® GbE, dual 10GbE, four USB 3.0, six SATA 6Gb/s, HD Audio and RoHS |
| LAN-10G2F-PHY-CS4227 |
10 GbE LAN card, dual port support, RoHS |
| 19800-000049-RS |
LPT flat cable, 240mm, P=2.54 |
| 19800-000075-RS |
PS/2 KB/MS cable with bracket, 220mm, P=2.0 |
| 19800-003100-100-RS |
Dual port USB cable with bracket, 300mm, P=2.54 |
| 19800-020100-100-RS |
RS-232 cable with bracket, Dual 10-pin to dual DB-9, 230mm, P=2.54 |
| 32102-000100-200-RS |
SATA power cable, MOLEX 5264-4P to SATA15P |
| 32205-003800-300-RS |
RS-422/485 cable, 200mm, P=2.0 |
| TPM-IN01-R20 |
20-pin Infineon TPM module, software management tool, firmware v3.17 |
|
|
| Packing List |
| |
|
| 1 x IMBA-BDE single board computer |
1 x One key recovery CD |
| 1 x I/O shielding |
1 x QIG |
| 2 x SATA cable |
1 x Utility CD |
|
|
|
.jpg)
.jpg)
