|
IEI Launches S19A-QM87 Marine Panel PC and SBOX-100 Maritime Embedded System
 S19A-QM87 Features |
|
|
|
 |
19” and 24” Fanless Panel PC with 4th Generation Intel® Core™ i5 Dual-core Processor |
|
|
-15°C ~ +55°C Wide Temperature and IP66 Protection with Flat-bezel Projected Capacitive Touchscreen |
|
|
Excellent Visual Performance |
|
|
• Three independent displays |
• Full OSD function configuration |
|
|
• 0%~100% full range dimming |
• 178°/178° wide viewing angles |
|
|
• Optical bonding improves visibility under bright light (optional) |
|
|
Isolation Protection |
|
|
• RS-232/422/485 isolated serial ports |
|
|
• Isolated 18V ~ 36V DC input |
|
• 2 x Isolated CAN-bus 2.0B |
|
|
iRIS Remote Management Module |
 |
|
 |
|
SBOX-100-QM87 Features |
|
|
|
|
|
Fanless marine computer with 4th Generation Intel® Core™ i5 dual-core processor |
|
|
-15°C ~ +55°C wide temperature |
|
|
Isolation protection |
|
|
• 4 x RS-232/422/485 isolated serial ports |
|
|
• Isolated 18 V~36 V DC input |
|
|
• 2 x Isolated CAN-bus 2.0B |
|
|
2 x 2.5" SSD bay with RAID 0/1 function |
|
|
Supports IEI iRIS-2400 (IPMI 2.0 compliant) |
 |
|
|
|
|
Intel® Core™ i5 High Performance Computing Power in a Fanless Design |
|
|
|
|
|
IEI’s high performance marine solutions are built with the powerful Intel® Core™ i5 CPU within a fanless system architecture. No matter your applications are general marine system management, monitoring or conning systems, radar systems, or ECDIS navigation, IEI’s marine computers will give you the most stability than ever.
The three simultaneously independent displays are supported via the on-board video output combinations of VGA, DVI and HDMI. This versatile combination of display output options makes the marine system ideal for multi-monitor required applications in the bridge room.
• Improved CPU performance with Intel® 22nm 4th Generation Mobile Core™ i5-4400E 2.7 GHz processor
• Two 204-pin 1600/1333MHz dual-channel DDR3 SDRAM support up to 16 GB |
 |
|
|
|
|
|
|
3 independent displays: HDMI, DVI, and VGA |
|
|
|
|
|
|
The three simultaneously independent displays are supported via the on-board video output combinations of VGA, DVI and HDMI. This versatile combination of display output options makes the marine system ideal for multi-monitor required applications in the bridge room. |
 |
|
|
|
Multiple Isolated Ports for Comprehensive Protection against Electrical Surges |
|
|
|
|
|
|
Ground loop and electric surges are common in the marine applications of electronic products due to the dense placement of devices. These stray electrical signals can cause equipment damage or malfunction. |
 |
|
■ 2.5 kV isolation protection on the RS-232/422/485 |
|
IEI marine computer is protected from any stray electrical signals from other devices on the ship. Electric surges that were generated from other electronic devices which often passed through serial lines to the marine computer can cause severe damage and malfunction to the computers. |
|
|
|
■ Isolated 18 V~36 V DC power 2250 V DC Input to Output Basic Insulation |
|
|
|
■ Two independent CAN 2.0B channels with 2.5 kV isolation protection |
|
CAN 2.0B is a kind of marine electronic data network for communication between marine electronic devices such as chart plotters, navigation instruments, GPS receivers, etc. |
|
|
 |
|
|
|
|
|
IEI Remote Intelligent Management System |
|
|
|
|
|
|
The marine computer supports IEI iRIS remote management solution which helps users to manage multiple devices through single management interface and elevates work efficiency. The iRIS solution only requires a module and Internet connection! |
 |
|
iRIS Key Feature |
Detailed Functions |
|
System health monitor |
• Hardware monitor
• Health log
• Event log |
Remote system
maintenance |
• Remote BIOS update
• Remote OS recovery
• Remote KVM + One Key Recovery
• Remote out-off-band backup |
|
Active alert & notice |
• Send instant system alerts via e-mail
• Send instant system alerts via SMS
• Send instant system alerts to management server |
|
Remote device control |
• Fan control
• Remote KVM
• Remote setting BIOS |
|
Screen record |
• Remote video streaming record
• Event Trigger Setting & video record |
|
Remote power control |
• Reset Power
• Power Off Server ─ Immediately
• Power Off Server ─ Orderly
• Power On Server
• Power Cycle Server |
|
Remote troubleshooting |
• Remote software update
• Remote OS installation & recovery
• Remote KVM
• Post code display |
|
Diagnose before dispatch |
• Health log analysis
• Event log analysis |
|
Group control |
• Group control |
|
|
|
|
ECDIS Implementation Schedule |
|
|
|
|
|
|
The International Maritime Organization (IMO) has announced that Electronic Chart Display and Information System (ECDIS) should be implemented into all the vessels by July 2018. Both new ships and existing ships should follow this regulation according to the timetable. The bridge systems are complicated and usually composed of multiple sub-systems. ECDIS clearly defines and regulates all the devices and connections, which include data collection, data communication and color calibration. Therefore, this is a huge opportunity for SI and hardware anufacturers. |
 |
|
|
|
|
|
|
Dynamic Position System (DPS) |
|
|
|
|
|
Dynamic Positioning System (DPS) is a closed-loop control system. It is driven by the control system of the ship to counteract the environmental forces to the ship, such as wind, waves and ocean currents. This mechanism could make ship remain in the position on the sea. DPS precisely calculates the propellant force by continuously monitoring the ship position deviation and analyzing the natural forces which could affect ship’s navigation direction. This process could make the ship remain in the correct position and maintain the right direction.
DPS is commonly used at various marine applications, such as subsea engineering work, underwater salvage, marine resources survey, marine engineering lifting, marine engineering umbilical laying, deep diving support, underwater engineering operations and marine engineering comprehensive test. DPS consists of measurement systems, control systems, power systems and propulsion systems, and other components. DPS possesses many functions which include maintaining the specified location, targeting, automatic searching for the best bow position,
turning point tracking, ROV automatic tracking, changing the center of rotation, automatic navigation, parallel movement and other functions. |
.jpg) |
_2.jpg) |
|
|
|
Electronic Chart Display and Information System (ECDIS) |
|
|
|
|
|
|
The bridge system usually needs to collect and analyze many observation data, including anemometer stations, speed logs, weather stations and GPS signal. In order to precisely observe the changing walruses, the sensors are usually located at the top of ship or in the open deck. Therefore, with the long distance communication, these signals and communication paths should all follow specific regulation such as NEMA 0813. There are large amounts of data received at bridge, and they should be carefully processed and precisely analyzed. A powerful and reliable embedded box or panel PC is necessary for this task. IEI marine embedded box, the SBOX series, equips up to six COM ports which can be used to synchronously handle a large amount of data. The system of ship bridge consists of many sub-systems, which includes navigation system, path control system, radar system, etc. Most of them usually have dual system in order to prevent the failure of primary system. Additionally, dual system could also appear the identical information such as sea chart to the captain and pilot simultaneously. In practical application, dual or more LAN ports are necessary for connecting and controlling multiple monitors. The SBOX series and the S24A/ S19A series contain six ports and two LAN ports to fulfill the requirements mentioned above. |
 |
|
|
|
|
|
|
S19A-QM87 Specifications |
|
|
|
|
Model Name |
S19A-QM87 |
|
LCD |
LCD Size |
19” |
|
Panel Type |
PMVA |
|
Max Resolution |
1280 x 1024 (5:4) |
|
Contrast Ratio |
2000 : 1 |
|
Brightness (cd/m²) |
300 |
|
LCD Color |
16.7M |
|
Pixel Pitch (mm) |
294 x 294 |
|
Viewing Angle (H-V) |
178° / 178° |
|
Backlight MTBF (Hrs) |
50000 |
|
Touchscreen & Controller |
EXC7920 (10-point), 6H |
|
System |
SBC Model |
SMB-QM87-R10 |
|
Chipset |
Intel® QM87 |
|
CPU |
Intel® 22nm 4th generation Mobile Core™ i5-4400E 2.7GHz processor |
|
RAM |
4GB 1600MHz DDR3 SDRAM (2GB*2)
Two 204-pin 1600/1333 MHz dual-channel DDR3 SDRAM support up to 16GB |
|
Input Interfaces |
I/O Ports & Switch |
2 x USB 2.0
2 x USB 3.0
1 x VGA
1 x DVI-D
1 x HDMI
1 x Mic-in
1 x Line-out
1 x Line-in
2 x Antenna SMA hole (reserved)
1 x Isolated 18V ~ 36V DC 3-pin terminal block
1 x Power button
1 x PS2 (through Y-type cable supporting KB/MS)
2 x CAN-bus 2.0B, 3-pin terminal block (2.5 kv isolation protection)
1 x DB-9 RS-232 (non-isolated) ,
4 x DB-9 RS-232/422/485 (2.5 kv isolation protection)
2 x RJ-45 GbE LAN with teaming support (2KV isolation protection) |
|
Expansion |
2 x Full-size PCIe Mini slot, 1 x iRIS-2400 slot
(iRIS remote management module) |
|
Ethernet Controller |
GbE1: Intel® I217LM with Intel® AMT 9.0 support
GbE2: Intel® I210-AT PCIe controller |
|
Sensor |
Ambient light sensor (0% ~ 100%) |
|
OSD |
Menu, brightness down, brightness up, LCD on/off by cap-sensor (graphics engine: Genesis STDP6038) |
|
Storage |
2 x 2.5” SSD bay with RAID 0/1 function
1 x Accessible CFast socket |
|
LED Indicator |
Power (power on: green; power off: orange)/storage (red, blinking)/IPMI (blue) |
|
Power Requirement |
Isolated 18V ~ 36V DC, screw-type 3-pin terminal block |
|
Operating Temperature |
-15°C ~ 55°C (5°F ~ 131°F) |
|
Storage Temperature |
-20°C ~ 60°C (-4°F ~ 140°F) |
|
Humidity |
5% to 95% RH |
|
Thermal Design |
Fanless |
|
Watchdog Timer |
Supports 1~255 sec. system reset |
|
Certifications |
EMC: CE, FCC
Safety: DNV, IEC 60945 4th, IACS-E10, IEC 61174
IP rating: IP66 compliant front panel and IP22 compliant rear cover |
|
Cut-out Dimensions (L x W) |
442 mm x 373 mm |
|
Dimensions (L x W x H) |
463 mm x 394 mm x 113 mm |
|
Net Weight (kg) |
9.91 |
|
Gross Weight (kg) |
13.38 |
|
Vibration and Shock |
IEC 60945 / DNV 2.4 compliant / IACS-E10 |
|
Power Supply (DC Input) |
DC Input ATX Power Supply
- P/N: 041D710-00-101-RS
- 150W power supply
- Input: 18~36V DC, 8-4A (max.)
- Output (max.): 12V @13A |
|
Power Consumption |
112W |
|
|
|
|
SBOX-100-QM87 Specifications |
|
|
|
|
Model Name |
SBOX-100-QM87 |
|
Chassis |
Color |
Black |
Dimensions
(WxHxD) (mm) |
290 x 225 x 75 |
|
System Fan |
Fanless |
Chassis
Construction |
Extruded aluminum alloy |
|
Motherboard |
CPU |
Intel® mobile Core™ i5-4400E (2.7 GHz, 37W) |
|
|
