|
|
What is LAN Bypass Function |
|
LAN Bypass feature removes a single point of failure so that essential business communication can continue while a network failure is diagnosed and resolved. In the event of a power, hardware or software failure. Hardware Bypass will automatically activate, allowing network traffic to continue. Traffic between the LAN and WAN is allowed without interruption. |
|
 |
|
Bypass Function Block Diagram |
|
The bypass function block diagram shown below depicts the block diagram for one pair of Local and Remote ports of the 4-port 10Base-T/100Base-TX/1000Base-T Ethernet board with bypass. |
|
|
|
|
|
|
Application |
|
• |
Security Networking Appliance platform:
firewall, virtual private network (VPN), IDS/IPS, content filtering, UTM, network management, network security capabilities
 |
• |
The LAN Bypass feature could assure the connection to Internet , if the networking appliance platform fails.
 |
|
|
|
|
Features |
|
1. |
Support 6 Intel® 10/100/1000 LAN ports |
|
2. |
Quad Gigabit port with LAN By-pass function |
|
3. |
Supports WatchDog Timer function for LAN by-pass enabling |
|
4. |
IEI One Key Recovery solution allows you to create rapid OS backup and recovery |
|
|
|
|
Specifications |
|
• |
CPU |
|
|
Socket P Intel® Core™ 2 Duo Processor with 800MHz FSB
Socket P Intel® Celeron® M Processor with 533MHz FSB |
|
• |
System Chipset |
|
|
Intel® GLE960 + ICH8M for ISP-9602
Intel® GME965 + ICH8M for ISP-9652 |
|
• |
FSB |
|
|
800 / 533 MHz for ISP-9652
533MHz for ISP-9602 |
|
• |
Memory |
|
|
Two 240-pins 533 MHz Dual Channel DDR2 SDRAM DIMM Supported max. 2GB for ISP-9602
Two 240-pins 667/533 MHz Dual Channel DDR2 SDRAM DIMM Supported max. 4GB for ISP-9652 |
|
• |
BIOS |
|
|
AMI BIOS |
|
• |
Graphic Engineer |
|
|
Intel® GMA X3100
Graphics core speed is 400 MHz for ISP-9602
Graphics core speed is 500 MHz for ISP-9652 |
|
• |
Ethernets |
|
|
LAN1~6: Intel® PCIe GbE Controller 82574L
4 x LAN By-Pass Function (with Relay Control):
» By-Pass Group 1: LAN1/ LAN2
» By-Pass Group 2: LAN3/ LAN4 |
|
|
• |
Display Output |
|
|
Analog CRT by VGA |
|
• |
Embedded Controller |
|
|
ITE IT8512E |
|
• |
I/O Interface |
|
|
2 x RS-232
3 x SATA II
1 x CF Type II
10 x USB 2.0 |
|
• |
Super I/O |
|
|
ITE IT8718F |
|
• |
Expansion |
|
|
PCIe x16 to PCB Golden Finger (For ISP-9652)
PCI Slot |
|
• |
WatchDog Timer |
|
|
Software Programmable supports 1~255 sec. System reset by Super I/O |
|
• |
Power Supply |
|
|
ATX Power |
|
• |
FAN Connector |
|
|
1 x 4-pin CPU FAN
1 x 4-pin SYS FAN |
|
• |
Humidity |
|
|
5%~95%, Non-condensing |
|
• |
Temperature |
|
|
Operating: 0°C~60°C |
|
|
|
|
Dimensions (mm) |
|
|
|
|
|
Ordering Information |
|
Part No. |
Description |
|
ISP-9652-R10 |
Socket P Intel® Core™ 2 Duo MB, GME965 with 800MHz FSB, VGA, CF, 6 Intel® GbE Lan with Dual group Lan-Bypass function, USB2.0, SATAII, RoHS |
|
ISP-9602-R10 |
Socket P Intel® Celeron® M MB, GLE960 with 533MHz FSB, VGA, CF, 6 Intel® GbE Lan with Dual group Lan-Bypass function, USB2.0, SATAII, RoHS |
|
19800-000114-RS |
RS-232 cable |
|
CB-USB14-RS |
Quad port USB cable |
|
CF-479B-RS |
CPU Cooler |
|
32100-088600-RS |
SATA Power Cable |
|
|
|
|
Packing List |
|
1 x ISP-9602/9652-R10 single board computer |
3 x SATA cable (P/N: 32000-062800-RS) |
|
1 x Mini Jumper Pack |
1 x Utility CD |
|
1 x QIG |
|
|
|
|
|
