|
IEI Launches the KINO-SE-i2 Mini ITX Motherboard
 Features |
|
|
|
|
|
 |
Mini-ITX form factor with AMD® Embedded G-Series SoC |
|
|
12V only single voltage design for AT/ATX power |
|
|
Dual independent display by VGA, dual HDMI |
|
|
Supporting dual PCIe Mini card slot with mSATA, wireless card, DOM capabilities |
|
|
Support IPMI 2.0 through iRIS module |
|
|
IEI One Key Recovery solution allows you to create rapid OS backup and recovery |
|
 |
|
Specifications |
|
|
|
|
Model |
KINO-SE-i2 |
|
SoC |
AMD® Embedded G-Series "Steppe Eagle" SoC
GX-424CC on-board Soc (2.4GHz, quad-core, 2MB cache, TDP=25W)
GX-412HC on-board Soc (1.2GHz, quad-core, 2MB cache, TDP=7W)
GX-212JC on-board Soc (1.2GHz, dual-core, 1MB cache, TDP=6W)
GX-411GA on-board Soc (1.0GHz, quad-core, 2MB cache, TDP=15W)
GX-209HA on-board Soc (1.0GHz, dual-core, 1MB cache, TDP=9W) |
|
BIOS |
AMI UEFI BIOS |
|
Memory |
Two 204-pin 1600/1333MHz dual-channel DDR3 & DDR3L SDRAM unbuffered SO-DIMM slots support up to 8GB |
|
Graphics Engine |
Support DX11.1, OpenGL 4.1 and OpenCL1.2
UVD4.2 decode for H.264, MPEG2/4, VC1, MVC
VCE 2.0 encode for H.264, VCE |
|
Display Output |
Dual independent display
2 x HDMI (up to 3840x2160@60Hz)
1 x VGA (up to 2048x1536@60Hz) |
|
Ethernet |
LAN1: Intel® I210-AT PCIe controller with NCSI support
LAN2: Intel® I211-AT PCIe controller |
|
External I/O Interface |
1 x RS-232
2 x USB 2.0
2 x USB 3.0 |
|
Internal I/O Interface |
|
1 x KB/MS (1x6 pin) |
2 x USB 2.0 (2x4 pin, P=2.0) |
|
1 x RS-422/485 (1x4 pin, P=2.0) |
2 x SATA 6Gb/s with SATA power connector |
|
3 x RS-232 (2x5 pin, P=2.54) |
|
|
|
iRIS Remote Management Module |
1 x iRIS-2400 slot |
|
SMBus |
1 x SMBus (1x 4 pin) |
|
Audio |
Realtek AL892 HD Audio codec
1 x S/PDIF by 4-pin (1x4) header for digital audio
1 x Line-out / Mic-in audio jack on rear IO |
|
Front Panel |
1 x Front panel (2x7 pin, Power LED, HDD LED, Speaker, Power Button, Reset Button) |
|
LAN LED |
2 x LAN LED (1x2 pin) |
|
Expansion |
|
1 x Half-size PCIe Mini card slot |
1 x mSATA (colay SATA port2) |
|
1 x PCIe x4 slot |
1 x SD card |
|
|
Watchdog Timer |
Software programmable, support 1~255 sec. system reset |
|
Digital I/O |
8-bit digital I/O (2x5 pin) |
|
Fan Connector |
1 x System smart fan (1x4 pin) |
|
Power Supply |
|
12V only DC input |
1 x Internal 4-pin (2x2) power connector |
|
1 x External DC jack (4-pin DIN) |
Support AT/ATX mode |
|
|
Power Consumption |
12V@ 2.7A (AMD GX-424CC 2.4GHz CPU with 1600MHz 8GB DDR3 memory) |
|
Operating Temperature |
-0°C ~ 60°C |
|
Storage Temperature |
-30°C ~ 70°C |
|
Operating Humidity |
5% ~ 95%, non-condensing |
|
Dimensions |
170mm x 170mm |
|
Weight |
GW:600g/ NW:250g |
|
|
|
|
Ordering Information |
|
|
|
|
Part No. |
Description |
|
KINO-SE-i2-4241-R10 |
Mini-ITX SBC with 28nm AMD® GX-424CC on-board SoC (quad-core, 2.4GHz, 25W) with VGA/LVDS, Dual GbE, Dual PCIe Mini, USB 3.0, SATA 6GB/s, iRIS-2400, Audio and RoHS |
|
iRIS-2400-R10 |
IPMI 2.0 adapter card with AST2400 BMC chip for DDR3 SO-DIMM socket interface |
|
CB-USB02A-RS |
Dual-port USB cable with bracket, 300mm, P=2.0 |
|
19800-000300-100-RS |
RS-232 cable with bracket, 300mm, P=2.0 |
|
32205-003800-300-RS |
RS-422/485 cable, 200mm, P=2.0 |
|
TPM-IN01-R11 |
20-pin Infineon TPM module, software management tool, firmware V3.17 |
|
Note: Models with other CPUs not listed in the table are requested by MOQ - 100 pcs/lot. |
|
|
|
|
Packing List |
|
|
|
|
1 x KINO-SE-i2 single board computer with CPU cooler |
1 x One Key Recovery CD |
|
1 x SATA with power output cable kit |
1 x QIG |
|
1 x I/O shielding |
1 x Utility CD |
|
|
|
|
