Media contact
IEI Integration Corp.
TEL: +886-2-8691-6798
FAX: +886-2-6616-0028
IEI Technology USA
TEL: +1-909-595-2819
FAX: +1-909-595-2816
IEI Integration China
TEL: +86-21-3462-7799
FAX: +86-021-3462-7797
IEI Integration Corp. 東京支店
TEL: +81-3-5901-9735
FAX: +81-3-5901-9736
AFL2-15A-H61 & AFL2-W15B-H61

AFOLUX GEN2 Features AFOLUX GEN2 Enhanced System Stability by Light Fanless
AFOLUX GEN2 Active Information Management AFOLUX GEN2 Wide Voltage Power Input
AFOLUX GEN2 Selectable AT/ATX Power AFOLUX GEN2 Specifications
AFOLUX GEN2 Seamless IP 64 Flat Bezel LED Panel with Multi-touch Operation
AFOLUX GEN2 Datasheet (For ordering information and packing list)

  AFOLUX GEN2 Features
AFOLUX GEN2 Flat-bezel LCD with LED backlight
AFOLUX GEN2 2nd Generation Intel® Core™ i7/ i5/ i3, Pentium® and Celeron® processor
AFOLUX GEN2 Two 204-pin DDR3 SO-DIMM slot (system max. 16GB) preinstalled with 4GB (2GB x 2)
AFOLUX GEN2 Projected capacitive touchscreen and 5-wire resistive type touchscreen supported
AFOLUX GEN2 Wi-Fi 802.11b/g/n 2T2R high speed wireless
AFOLUX GEN2 EM or Mifare RFID reader
AFOLUX GEN2 Built-in 1.3-megapixel webcam with AF, AE and AWB capabilities
AFOLUX GEN2 Built-in two 2W speakers and microphone
AFOLUX GEN2 IP64 compliant front panel
AFOLUX GEN2 Auto dimming control
AFOLUX GEN2 Light fanless technology design
AFOLUX GEN2 K-type thermalcouple temperature sensor
AFOLUX GEN2 Wide range 9~36 VDC input

  AFOLUX GEN2 Enhanced System Stability by Light Fanless


35W/ 65W Intel® Core™ i7/ i5/ i3 and Celeron® Processor in Light Fanless
57% of light industrial applications are set in quiet working environments in -20 °C to 35 °C and required to prevent dirt accumulation caused by system fans, like clean rooms, indoor HMI, and hospitals. To optimize system performance, a high power CPU is essential. However, a system fan is needed for CPU heat dissipation which is not compatible to some applications. IEI introduces the light fanless panel PC to provide you a fanless solution with high performance.


K-type Ambient Temperature Sensor with Smart Fan
AFOLUX Gen II light fanless technology utilizes K-type thermocouple temperature sensor to detect environment temperature and control fan operation, enhancing system stability and remote environment control. When the environment is lower than default temperature set by user, the fan will be switched off, showing the advantage of quite and dust free from fanless mode. While the environment temperature is higher, the smart fan will be turned on to speed up heat emission.
[Support AFL2-XXX-H61 series model]
  AFOLUX GEN2 Active Information Management : Integrated RFID Reader and LED Dash Light System


The AFOLUX GEN II series supports RFID reader function. The RFID reader is located at the bottom of the screen. All the data on the RFID tag can be easily retrieved or updated through the reader to secure the data transmission process and increase efficiency for certain identity group.

  AFOLUX GEN2 Seamless IP 64 Flat Bezel LED Panel with Multi-touch Operation


Rugged and flat screen
The AFOLUX GEN II series’ flat-bezel design, which is thinner than before and no bezel needed, makes it look more stylish and is free from cleaning dust cumulated at the bezel. The IP64 compliant screen is water and dust resistant, ensuring flawless operation. The AFOLUX GEN II is also upgraded to use LED panel. The AFOLUX GEN II benefits from the advantages of the LED panel’s thin depth and becomes thinner and stronger.


  AFOLUX GEN2 Wide Voltage Power Input


Power supply requirement varies from applications. Incorrect voltage input will damage electronic components thus cause system break down. To eliminate time and repair cost from downtime, AFOLUX GEN II series offers wide voltage power input, which fits different application scenarios and increase stability of the system.


  AFOLUX GEN2 Selectable AT/ATX Power

Remote Control AT Mode

The power is controlled by a central power unit rather than a power switch. The system turns on automatically when the power is connected.
• Easy to turn on/off with wall/panel mounting
• Automatic start when power connected

Remote Control ATX Mode
With the ATX mode selected, the system series panel PC goes in a standby mode when it is turned off. The panel PC can be easily turned on via network or a power switch in standby mode.
• Power management
• Remote control via network advantage

  AFOLUX GEN2 Specifications

  Model   AFL2-15A-H61 AFL2-W15B-H61
LCD Specifications Size 15″ (4:3) 15.6″ (16:9)
Resolution 1024 (W) x 768 (H) 1366 (W) x 768 (H)
Brightness (cd/m²) 400 300
Contrast Ratio 700:1 500:1
LCD Color 262K/16.2M 16.7M
Pixel Pitch (mm) 0.297 (H) x 0.297 (V) 0.252 (H) x 0.252 (V)
Viewing Angle (H-V) 160° / 140° 170° / 160°
Backlight MTBF 50,000 hrs  (LED backlight) 50,000 hrs  (LED backlight)
System CPU 2nd Generation Intel® Core™ i7/ i5/ i3, Pentium® and Celeron® processor 
Chipset Intel® H61
RAM Support two 204-pin DDR3 SO-DIMM slot (system max. 16GB) preinstalled with 4GB (2GB x 2)
Ethernet Realtek RTL8111E PCIe GbE controller supports ASF 2.0
SSD CF Type II socket
HDD 2.5" SATA 3Gb/s  HDD bay
Input / Output 2 x RS-232 (DB-9 connector)
GbE LAN (RJ-45 connector) on left side
RS-422/485 (RJ-45 connector)
3 x USB 2.0 (two on the bottom, one on the left)
2 x USB 3.0 
1 x Mini USB 2.0 port on front panel
1 x Micro SD card slot on front panel
Line out, MIC on left side
VGA port
HDMI port
Power switch
AT/ATX switch
Reset button
Clear CMOS button
9 ~ 36V DC jack
Expansion Interface 1 x PCIe Mini slot for Wi-Fi
1 x PCIe Mini slot reserved
Other Features Audio AMP 2 W + 2W (internal speaker)
Camera 1.3 megapixels with low light function
RFID Reader EM 125 KHz or Mifare 13.56 MHz card reader (optional)
MSR Card Reader MSR card reader (optional)
OSD Function LCD on/off, brightness up/down, volume up/down, Hot Key
Ambient Light Sensor Yes
Infrared Remote Controller Yes
Touch Screen 5-wire resistive type or projected capacitive type touch screen
System Cooling Light fanless (smart fan operates above default temperature setting)
LED Light Bar N/A
Wireless 1 x Wireless LAN 802.11 b/g/n module (internal PCIe Mini card interface)
(Optional, internal USB interface, Bluebooth V2.0+EDR)
Physical Construction Front Panel PC + ABS Plastic
Mounting Wall, Stand, Arm VESA 100mm x 100mm Panel, Wall, Rack, Stand, Arm VESA 100mm x 100mm
Color Black
Dimensions (WxHxD)(mm) 363.2 x 305.1 x 58.8   399.4 x 271.2 x 58.8 
Weight (N/G) 5.2 kg / 7.3 kg 4.5 kg / 6.5 Kg
Environment Operating Temperature (°C)
(Ambient with air flow)
-20°C ~ 50°C
Storage Temperature (°C) -20°C ~ 60°C
Humidity 10% to 95% (non-condensing)
IP Level IP 64 compliant front panel
Power Power Supply 90W power adapter 
Input:100 V AC ~ 240 V AC, 50 / 60Hz, Output: 19 V DC
Power Requirement 9 ~ 36 VDC
Power Consumption 19V@3.42A
 (Intel® Core™ i3-2100T CPU with 4GB 1333 Mhz DDR3 memory)
(Intel® Core™ i3-2120 CPU with 4GB 1333 Mhz DDR3 memory)