|
IEI Launches the iQ7-BT Embedded Board
 Features |
|
|
|
|
 |
22nm Intel® Atom™ on-board SoC supported |
|
|
Qseven connector pinout according to Qseven Specification Revision 2.0 |
|
|
Supports 2GB 1066/1333 MHz DDR3L memory (4GB optional) |
|
|
Optional soldered down 2GB~64GB SSD |
|
|
IEI One Key Recovery solution allows you to create rapid OS backup and recovery |
|
 |
|
Specifications |
|
|
|
|
Model |
iQ7-BT |
|
CPU |
Intel® Atom™ E3845 on-board SoC (1.91GHz, quad-core, 2MB cache, TDP=10W)
Intel® Atom™ E3827 on-board SoC (1.75GHz, dual-core, 1MB cache, TDP=8W)
Intel® Atom™ E3826 on-board SoC (1.46GHz, dual-core, 1MB cache, TDP=7W)
Intel® Atom™ E3825 on-board SoC (1.33GHz, dual-core, 1MB cache, TDP=6W)
Intel® Atom™ E3815 on-board SoC (1.46GHz, single-core, 512KB cache, TDP=5W)
Intel® Celeron® J1900 on-board SoC (2GHz, quad-core, 2MB cache, TDP=10W)
Intel® Celeron® N2930 on-board SoC (1.83GHz, quad-core, 2MB cache, TDP=7.5W)
Intel® Celeron® N2807 on-board SoC (1.58GHz, dual-core, 2MB cache, TDP=4.3W) |
|
Memory |
2GB soldered down 1066/1333 MHz DDR3L memory (up to 4GB) |
|
BIOS |
UEFI BIOS |
|
Graphics Engine |
Intel® HD Graphics Gen 7 Engines with 4 execution units, supports DX11.1, OpenGL 4.2 and OpenCL1.2 |
|
Display Output |
Dual independent display
1 x 18/24-bit dual-channel LVDS by CH7511B DP to LVDS converter (up to 1920x1200@60Hz)
1 x DDI (DP/HDMI, max. resolution 2560x1600/1920x1080) |
|
Ethernet |
Intel® I210 GbE controller |
|
Embedded Controller |
ITE IT8528E/FX |
|
I/O Interface |
6 x USB 2.0 signal to baseboard
1 x USB 3.0 signal to baseboard |
|
Storage |
2 x SATA 3Gb/s signal to baseboard
Optional soldered down 4GB SSD (SATA port 2) |
|
Audio |
High-definition Audio interface to baseboard |
|
SMBus |
Yes, to baseboard |
|
I2C |
Yes, to baseboard |
|
LPC |
Yes, to baseboard |
|
SDIO |
One 8-bit SDIO 2.0, to baseboard |
|
SPI |
Yes, to baseboard |
|
Serial port |
One serial port to baseboard (form EC) |
|
Expansion |
3 x PCIe x1 signal to base |
|
Watchdog Timer |
Software programmable support 1~255 sec. system reset (form EC) |
|
Power Consumption |
3.3V@0.13A, 5V@0.13A, 12V@1.35A, 5VSB@0.12A
(Intel® Atom™ E3845 CPU, 2GB on board) |
|
Operating Temperature |
-40°C ~ 85°C |
|
Operating Humidity |
5% ~ 95%, non-condensing |
|
Dimensions |
70 mm x 70 mm |
|
Weight |
GW: 300g / NW: 150g |
|
|
|
|
Ordering Information |
|
|
|
|
Part No. |
Description |
|
iQ7-BT-E38451W2-R10 |
Qseven Rev. 2.0 module supports Intel® Atom™ processor E3845 (quad core, 10W), on-board 2GB DDR3L, LVDS, DDI, GbE, SATA 3Gb/s, SDIO, USB 3.0, Audio, -40°C~85°C and RoHS |
|
iQ7-BT-E38251W2-R10 |
Qseven Rev. 2.0 module supports Intel® Atom™ processor E3825 (dual core, 6W), on-board 2GB DDR3L, LVDS, DDI, GbE, SATA 3Gb/s, SDIO, USB 3.0, Audio, -40°C~85°C and RoHS |
|
iQ7-BT-E38451-R10 |
Qseven Rev. 2.0 module supports Intel® Atom™ processor E3845 (quad core, 10W), on-board 2GB DDR3L, LVDS, DDI, GbE, SATA 3Gb/s, SDIO, USB 3.0, Audio, and RoHS |
|
iQ7-BT-E38251-R10 |
Qseven Rev. 2.0 module supports Intel® Atom™ processor E3825 (dual core, 6W), on-board 2GB DDR3L, LVDS, DDI, GbE, SATA 3Gb/s, SDIO, USB 3.0, Audio, and RoHS |
|
iQ7-DB-MATX-R10 |
Baseboard for Qseven Rev. 2.0 module |
|
Note: Models with other CPUs not listed in the table are requested by MOQ - 100 pcs/lot. |
|
|
|
|
Packing List |
|
|
|
|
1 x iQ7-BT single board computer |
1 x QIG (Quick Installation Guide) |
|
1 x Heatsink |
1 x Utility CD |
|
|
|
|
